-
Technologies
-
Applications
-
Properties
-
Materials
Made a large-diameter pinion. There are no hollow structures inside the model, the casting is 100%. A tolerance was left in the 6 axial holes to thread the M5 screws into them after printing. The model was printed using a substrate (raft) to ensure an even plane at the base of the pinion.
| Infill | 100% (without pores) |
| Material | White polycarbonate Polymaker PC |
| Printing time | 9 hours |
| Nozzle temperature when printing | 285 degrees Celsius |
| Bed temperature | 105 degrees Celsius |
| Blowing model | Off |
